Counter-flow cooling machine is mainly used for cooling high temperature pellets after granulation. Cooling air and high temperature and humidity of materials are reverse movement, so the material is gradually cooled from top to bottom, avoiding the material surface is cracking, the core moisture and heat is difficult to distribute and Easy broken and other shortcomings during cooling time.
Product IntroductionThe material temperature after cooling is not higher than the outside temperature + 5 ℃, the precipitation rate of not less than 3.8%, high-quality pellet fuel, prolonging pellet fuel storage, enhancing economic efficiency played a very good effect.
1.The use of reciprocating linear motion nesting fence unloading mechanism, the material discharge smoothly, uniform discharge amount.
2.The new rotary feeder ensures the spread material sufficiently uniform, the cooling can significantly reduce breakage, adjustable fabric range, small power consumption.
3.High cooling efficiency, high automatic degree, low noise, easy to operate.
|Cooling Volume (m3)||1.2||1.5||2.5||4||6|
|Cooling Time||No less than 10 minutes|
|Temperature after cooling||Higher 3-5℃ than room temperature|
|Wind Pressure||200mm H2O|
|Dimension (L*W*H) (mm)||1570x1200x2470||1556x1616x2505||2100x1966x2870||2300x2150x3190||3315x2146x3722|
Online demand Feedback
If you are interested in the product page, to better understand and purchase, please fill out the form below to submit your contact information and product demand to us, we will contact you as soon as possible to resolve.